How to Reset Electronic Parking Brake Mitsubishi Outlander? The Mitsubishi Outlander is a popular SUV that comes with an electronic parking brake system.
If you own a Mitsubishi Outlander, you may have experienced issues with the electronic parking brake.
In some cases, the electronic parking brake may fail to engage or disengage properly, causing the brake warning light to illuminate on the dashboard.
In this article, we will show you how to reset the electronic parking brake on your Mitsubishi Outlander.
Step-by-Step Guide How to Reset Electronic Parking Brake Mitsubishi Outlander
To reset the electronic parking brake in a Mitsubishi Outlander, follow the steps below:
Step 1: Turn off the ignition
Turning off the ignition means that you need to switch off the engine of your car.
This is usually done by turning the key in the ignition switch to the “off” position. Make sure the car is in park mode before turning off the ignition.
Step 2: Engage the Brake Pedal
Engaging the Brake Pedal means that you need to press down on the brake pedal with your foot.
This will ensure that the car is securely held in place and prevent it from moving while you work on the electronic parking brake.
Step 3: Press the Parking Brake Switch
Pressing the Parking Brake Switch means that you need to locate the parking brake switch, which is usually located on the center console of the car.
Press the switch to activate the electronic parking brake for at least three seconds. You should hear a whirring sound as the parking brake engages.
Step 4: Release the Brake Pedal
Release the Brake Pedal means that you can take your foot off the brake pedal once the parking brake is engaged.
The electronic parking brake will hold the car in place, so you don’t need to worry about the car moving.
Step 5: Press the Parking Brake Switch Again
Press the Parking Brake Switch Again means that you need to press the parking brake switch once again to release the electronic parking brake. You should hear a whirring sound as the brake disengages.
Step 6: Wait for the Electronic Parking Brake to Reset
Wait for the Electronic Parking Brake to Reset means that after releasing the parking brake, you should wait for a few seconds to allow the system to reset itself.
This is important to ensure that the electronic parking brake is functioning properly and is ready to be used again.
Step 7: Check the Brake Warning Light
Check the Brake Warning Light means that you should check the dashboard of your car for the brake warning light.
If the light is still illuminated, it may indicate that there is a problem with the electronic parking brake system.
In this case, it is recommended to seek professional help from a mechanic to diagnose and fix the issue.
The Reasons for Resetting Electronic Parking Brake
There are several reasons why you might need to reset the electronic parking brake (EPB) on your vehicle. Here are three common reasons:
- Maintenance: If you have recently changed your brake pads, you may need to reset the EPB. This is because the EPB system is designed to work with a specific thickness of brake pads. When you change your pads, the EPB may not work correctly until it has been reset.
- Malfunction: If the EPB light on your dashboard is illuminated, it is an indication that there is a problem with the EPB system. Resetting the EPB may help to clear the error and allow the system to function properly.
- Manual Release: In some cases, you may need to manually release the EPB. If you have done this, you will need to reset the EPB once the issue has been resolved to ensure that the system is functioning correctly.
Common Issues with Electronic Parking Brake Mitsubishi Outlander
While resetting the electronic parking brake might solve some issues, there are some common issues that might require further investigation.
Here are some common problems that you may encounter with the EPB system:
- EPB warning light: If the EPB warning light on your dashboard is illuminated, it is an indication that there is a problem with the system. This could be due to a malfunction in the EPB control module or a faulty sensor.
- EPB does not engage: If you are unable to engage the EPB, it could be due to a problem with the actuator or the wiring that connects the actuator to the EPB control module.
- EPB does not release: If the EPB is engaged but does not release, it could be due to a problem with the EPB control module or the actuator.
- EPB engages while driving: If the EPB engages while you are driving, it could be due to a malfunction in the EPB switch or a faulty sensor.
- EPB makes noise: If you hear unusual noises when engaging or disengaging the EPB, it could be due to a problem with the actuator or the EPB motor.
If you encounter any of these issues with your EPB system, it is recommended to have your vehicle inspected by a qualified mechanic.
They will be able to diagnose the issue and provide the necessary repairs to get your EPB system functioning properly again.
What does the EPB light on the dashboard mean?
The EPB light on the dashboard indicates that there is an issue with the electronic parking brake system.
How do I release the EPB manually?
To release the EPB manually, locate the EPB release lever under the steering wheel and pull it towards you.
Can I reset the EPB on my own?
Yes, you can reset the EPB on your own by following the steps mentioned above.
Can I drive the vehicle if the EPB light is on?
It is not recommended to drive the vehicle if the EPB light is on as there might be an issue with the brake system.
How often should I check the EPB system?
It is recommended to check the EPB system every six months or 6,000 miles, whichever comes first.
Resetting the electronic parking brake (EPB) on your Mitsubishi Outlander is a straightforward process that can be done with a few simple steps.
However, it is important to note that if you encounter any issues with your EPB system, it is recommended to have your vehicle inspected by a qualified mechanic.
Ignoring warning signs or attempting to fix the issue yourself could lead to further damage or even accidents on the road.
Regular maintenance of your EPB system, including checking the brake pads and replacing them when necessary, can help prevent issues from arising.
By taking good care of your EPB system, you can ensure the safety and reliability of your Mitsubishi Outlander.
If you do need to reset your EPB, make sure to follow the steps outlined above and always refer to your vehicle’s manual for specific instructions.
By following these steps, you can reset your EPB system with confidence and get back on the road safely.
If you have any further questions or concerns about resetting the EPB on your Mitsubishi Outlander, feel free to consult with a qualified mechanic or contact your local Mitsubishi dealership.